We are professional enterprise
manufacturer & supplier of a complete range of 4in1 Remote
Vibrancy and Shock Dog training collars-1000M. Our top quality 4in1
Remote Vibrancy and Shock Dog training collars-1000M are based on
years of research and development and under the guideline of
ISO9001-2000 quality system and CE and UL certified.
4in1 Remote Vibrancy and Shock Dog training
collars-1000M Description :
This new generation direct transmission dog
training collar actual a very effective electronic dog training
system with a work distance
up to 1000 meters
Is your dog out of control?
Are you finding it diffcult to train hime/her using orthodox
methods?......
You are not alone. The remote-controlled collar is definitely the
solution. It emits a light corrective "static" shock when your dog
behaves badly, immediately linking the behavior and negative
response in their mind.
It is designed to train your dog humanely and without the
application of brute force
It's a 4 functional remote training collar
1. Instant Static Impulse: Using while emergency
2. Static Impulse after Vibration: Warning before Electric
shock
3. 3 Level B-B sound: The B-B sound of the remote controller can be
adjusted by the pushrod switch on the side: Loud/Low/Silent
4. Flashes of light: Flashes of light will make it easy for you to
look for your dog at night. The laser patterns will provide fun for
the pet.
Range up to 1000 meters of range in the free one. Signal goes also
through doors and walls
Integrated solenoid - no more problems with the movement
sensor
Audio signal is transferred finally again to collar! Additionally
the audio signal can be likewise activated to the dog
By in collar integrated antenna is not exchangeable that collar
!
stainless exploration poles knots for the forwarding of the
vibration even with closer skin.
At the same time laser pointer at the transmitter (to play with the
dog )
Features
1. The strong static impulse can penetrate the hair of the pet and
fabric within 6mm thick. It is unnecessary to let the discharging
point touch the skin of the pet. Therefore it is safe for the
pet.
2. The static impulse can quickly and effectively curb the improper
deeds of the pet.
3. The warning vibration will let the pet associate the vibration
with static impulse. In the end, vibration will achieve the same
effect as the static impulse.
4. Both the static impulse and warning functions are set with
automatic stop. This is for not reprimanding the pet
continuously.
5. With the vibration induction power switch in the collar
receiver, it will turn on and turn off automatically to save
power.
6. Water resistant Collar
Specification - Collar
Length: 43mm Height: 68mm Width: 38mm.
Weight 110 g (module + battery )
Collar length adjustable from 20 to 50cm
Power:2* 1.5V AAA battery (supplied)
Water resistant and shockproof.
Specification- Handset
Length: 120mm Height: 25mm Width: 45mm.
Weight: 110g (with battery)
Power: 2*1.5V AAA battery (supplied)
LED signal light and illumination at night
The sound function for attracting attention
Water Resistant
I. Preparation Before Using
1. Check that battery is installed in the remote controller then
switch it on.
2. Match the remote controller and the receiver. As soon as putting
batteries into the receiver, you should press vibration or shock
button on the remote controller and the receiver will vibrate
twice. In this way the match is done and the remote control system
can operate normally.
3. If the receiver vibrates on its own without pressing any button
after batteries are installed, please take out the batteries for
over ten seconds and put them back and try step 2 again.
4. Checking the remote controller: Press the buttons on the remote
controller one by one, the indicator light will light. If the
indicator light doesn't light or goes dim, change the
batteries.
5. Checking the receiver: With the vibration induction switch in
it, the receiver will enter into standby mode automatically upon
shaking. The receiver will turn off automatically when it is in
stillness for more than 3 to 5 minutes, so as to save power.
6. Connect the collar and the receiver. Adjust the length of the
collar so that it suits the neck of your pet best. Don't make it
too tight while the discharging point of the receiver can touch the
neck of the pet.
7. Press the vibration button on the remote controller and the
receiver will vibrate. In about three seconds, weak static impulse
will be release and it will turn stronger gradually and will be
stopped in 9 seconds.
8. Press the shock button on the remote controller and the
discharging point will release static impulse. The discharging
state can be checked by the testing light supplied separately in
the box.
9. Press the whistle button on the remote controller and a sound
will be made from the receiver.
10. Press the light button on the remote controller and the LED in
front of the remote controller will light.
II. Operational Instructions:
· Turn the switch of the remote controller to the "ON" position.
Turn it "OFF" if you don't use it, for fear of mistaken
operation.
· Open the insert buckle of the collar and put the collar round the
neck of the pet. Adjust the tightness of collar. Don't make it too
tight while the discharging point of the receiver can touch the
neck of the pet.
· Most pets feel uncomfortable at first wearing the collar. Don't
use any of the functions before the pet has gotten used to the
collar.
· With the vibration function pressed, three seconds of vibration
will be given. Then static impulse will release and turn stronger
gradually. This is an effective way to let the dog associate shock
with vibration.
· The shock is only used to curb the improper deeds of the pet in
emergency. It will stop automatically in three seconds. If you want
more shock, release the button and press it again.
· The shock is used to curb the improper deeds of the pet. After
each successful training, the owner will be able to let the pet
know what should be done and what should not be done. Over a period
of training the pet will understand what its owner likes and
doesn't like.
· We suggest you give the dog vibration by the vibration button
before starting the shock. After a time of training, the dog will
learn that shock will come after vibration. In this way, the
vibration alone can effectively curb the improper deeds of the pet.
The shock only acts as a menace that might be unnecessary for most
of the time.
· Prepare some socks for the dog as rewards for good deeds. This
will make better effect in the training.
· The LED can be used for illumination or giving training
signals.
· Pressing the sound button, a sound will be made from the receiver
for attracting the attention of the dog.
· If you don't use this product, take the collar and receiver off
the dog and place them in a place without vibration, so as to
prolong the lifetime of the batteries.
· If you don't use the collar receiver for a long time, take out
the batteries.
III. How to change the batteries:
· Receiver: Take off the rubber bottom cover and you will see two
batteries (model: AAA / 1.5V). Take out the batteries and install
the new ones. Pay attention to the polarity of the batteries. Mount
the rubber bottom cover and press it tight.
· Remote controller: The battery cell cover is at the lower part of
the back of the remote controller. Open the cover by pressing it
following the direction of the arrow. Take out the battery (23A,
12V) and put a new one back and then close the cover.
· The batteries used for this product are ordinary ones, which can
be found in supermarkets and department stores. Please provide the
correct model while buying them.
· The lifetime of the batteries vary according as how often you use
the product. Since the remote controller only consumes power when
you press the buttons to send signals, its battery's lifetime is
usually more than one year. The battery lifetime of the receiver
depends on how frequently you use it. Therefore you should often
check the batteries by watching the indicator light in the
receiver.
IV. Notes for Use:
· The valid distance of remote controlling means the straight-line
distance between the remote controller and the receiver without
obstacles in between. If there are interference signals or signal
screening around, the actual remote control distance may
vary.
· This product is for pet training. Only by training can the pet
understand the intention of its owner. Good effect can only be
achieved after a period of training.
· Presently, this product is the most effective and safest tool for
training pet. Following the correct operational instructions, you
can effectively train the pet and bring it no harm.
· Though the receiver is waterproof, you cannot immerse it into the
water for a long time. And you should keep the remote controller
out of water.
4in1 Remote Vibrancy and Shock Dog training
collars-1000M Package included:
Multi-function training collar device
Collar length adjustable
Remote control unit Adjustable
1.5V AAA battery
Collar testing unit
User Instruction (English Ver.)
More Tips About Dog Training Aids At
My-Batteries. Net:
There are two types of no bark collars;
shock and spray.
1) The shock collar delivers a small electrical shock when it
detects a bark, either through vibrations in the dogs throat or
with a microphone.
2) The second type uses harmless citronella spray to correct the
barking, this type is perfectly safe and is a great choice if you
don't want to shock your dog.
Both types are proven to be effective, the spray collar has the
added advantage of affecting four senses of the dog. He hears the
spray, sees it, smells it and feels it. The picture above shows how
it sprays the citronella in front of the dog.
Step 2 For electric style anti-bark collars look for these
features.
1) Adjustable intensity levels: The shock delivered to a 120 pound
dog isn't advisable to give to a 6 pound dog. Look for this feature
and get the appropriate strength for your dog. Some models are
specifically designed for lap dogs, large dogs and even stubborn
dogs.
2) Auto off feature: Make sure the collar is designed to turn off
if the dog barks 15 or more times in one minute. This feature is
necessary as to not harm the dog, and also allow the dog to alert
you if there is an intruder or other emergency.
3) Increasing intensity levels: A nice feature to have is
increasing intensity levels should the dog continue to bark in a
set period of time.
4) Vibration: Some units will also vibrate if a bark is detected.
This is a nice feature as it adds another stimulus to correct the
behavior.
Step 3 To be honest, when it comes to spray style no bark training
collars there are no specific features to look for other than being
refillable.
I will say this though.. Spray style no bark collars have been
scientifically proven to be twice as effective in controlling
excessive barking. Couple this with, in my opinion, being a more
humane way to train the dog makes this style the hands down winner
when it comes to dog training products.
Step 4 When you're ready to buy a no bark dog training collar
consider online merchants as they generally offer better prices and
often have user reviews right on their site. There are some great
links right on this page to visit when you're ready to buy the best
no bark dog training collar at the best price possible.